Requirements 1. 3pc set 39*28*20cm M:35*24*18 cm S: 31*20*16cm Specific construction (See Picture) 2. Add fitted tailored liners 3. Liners should have a tie off 4. Liners should cover rim of basket only. (rim is 1 inch wide) 5. Custom wood lids 6. Lids will be pull off with 1 inch rim on all 4 sides (See example in picture) 7. Wood thickness should be approximately 3mm thick 8. Words on lids should be Font = Segoe MDL2 Assets. If you don’t have this font we will have to approve the letter font. 9. Lids will be painted with clalkboard/blackboard paint. Then The edges must be sanded down so the lids look distressed And edges are more rounded. The goal is to see the bare wood on the edged after sanding. 10. Lids will also need corner decoration or stencil like the pics provided. The letters and corner emblems should be wood color. 11. The letters and corner emblems can be masked off when painting lids or painted on after lids are painted. 12. We will want to add a liquid chalk pen that has an eraser pen cap (see picture). Need to make sure pen is a good light color that shows up good on lids and also erases easily and cleanly. 13. We will want custom boxes and custom thank you cards included with each set of baskets.